Publicidad
Idiomas disponibles
Idiomas disponibles
NOTICE
When using a vertical position the pocket must be worn so that the trigger faces downward!
•
Remove buckle and adjuster from waist strap
>>> Velcro 6b on the waist strap must face upward
•
Insert the waist strap through the horizontal or vertical strap
positioner (black fabric) on the back of the pocket until velcro 6b
connects to velcro 6c inside of the strap positioner.
>>> This prevents the pocket from moving around the waist strap
•
Slide buckle and buckle back on
•
The X-strap on the back of the pocket allows you to insert your own
straps, up to a width of 50mm.
>>> Insert the waist strap horizontally or vertically over the black
strap positioner and under the X-strap
Open the buckle and place the waist belt around the hips
>>> Wear the pocket so that the Restube logo faces outward and
the strap positioner rests against the body
Close buckle safely
Fasten the buckle securely and adjust the waist strap to fit tightly
Wear Restube on your right, so that the trigger is easily accessible
with your left hand
2.1.1 Use in combination with other equipment
•
If Restube lifeguard is used in combination with other equipment or if it is
mounted onto other equipment, the user must make sure that the functionality
of the equipment will not be impaired.
•
Using Restube lifeguard this way is at the users own risk. There are many
different kinds of safety equipment (e.g. life jackets, fin belts, other belts).
That's why RESTUBE cannot guarantee that Restube lifeguard can be mounted
onto each kind of equipment. In any mounting case, the Restube logo must face
outwards, so that the pocket can open without difficulty. The trigger must be
easily accessible and must face downwards or off to the side.
•
Make sure that the trigger is easily accessible and free.
The inflation of the buoy as well as the opening of the pocket must not be
•
impaired.
•
If mounted onto other equipment without using the Restube hip belt, the func-
tionality of the quick-release buckle will be lost.
Mounting onto other equipment
•
Detach hip belt.
•
Attach Restube pocket to the webbing of your own equipment using the belt
guides on the back of the pocket. Make sure that the pocket cannot slip sideways.
•
The belt guide allows insertion of webbings of 38mm to 50mm width, both
vertically and horizontally.
>>> If mounted vertically the trigger has to face downwards.
•
Position the pocket on the right side of your body so that the trigger can be
reached easily with the left hand.
2.2 How do I trigger Restube?
NOTICE
Triggering and inflation is only guaranteed in water because buoyancy
pulls the buoy from the pocket! Duration until completely filled may
be lengthened when triggered on land.
•
•
Grab the trigger with your left hand and pull away from the
body firmly.
The buoy will unfold within seconds.
17
Publicidad
