DiO VDP-IP01 Guia De Inicio Rapido página 33

2.2 7" Screen
3. Mounting the video phone
3.1 Exterior unit
Before you start
1. Make sure there is no power supply to the screen.
2. Connect the cable for the exterior unit before mounting
A. Non-flush mounting
1. Make 4 holes in line with the positions shown on the protective cover
2. Insert the pins into the holes and fix the protective cover using the screws provided
3. Connect the cable from the screen to the exterior unit
4. Use the screws provided to fix the exterior unit to the protective cover
B. Flush mounting
2
3
1
1 Microphone
2 24 V supply connector
3 Exterior unit connector
4
4 Speaker
1. Make a space in your wall large enough to fit the flush-moun-
ting box
2. Make 4 holes in line with the positions shown on the
flush-mounting box
3. Insert the pins into the holes and fix the flush-mounting box
using the screws provided
4. Connect the cable from the screen to the exterior unit
5. Use the screws provided to fix the exterior unit to the
flush-mounting box