nedis WIFICBO40BK Guia De Inicio Rapido página 7

• Insert A
• Close A
4. Plug the other end of A
5. Connect the USB power adapter to a power outlet to charge the camera.
-
6. Hold the power button A
The status indicator LED A
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your phone via
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your e-mail address
4
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Connecting the Nedis SmartLife app
1. Tap + in the top right corner in the Nedis SmartLife app.
2. Select the product type you want to add from the list.
3. Confirm the status indicator LED A
4. Enter the Wi-Fi network data and tap Confirm.
5. Tap Continue and a QR-code will appear.
6. Hold your phone with a 15 – 20 cm distance in front of the camera.
If the camera has detected the QR-code, you will hear a sound.
7. Tap to confirm you heard the sound.
8. Give the product a name and tap Done. A
4
To reset the camera:
Press and hold the reset button A
Then repeat step 1 to 8 closer to the router.
WIFICBO40BK_MAN_COMP_0622_print.indd 7 WIFICBO40BK_MAN_COMP_0622_print.indd 7
through the opening in A
6
8 .
Before first use charge the camera for 8 hours, even if the camera says it is
already fully charged.
Google Play or the Apple App Store.
and tap Continue.
You will receive a verification code on your mobile phone or e-mail address.
now ready for use.
If the product failed to connect, A
into A
8
6 into a USB adapter (not included).
3 for 5 seconds to switch on the product.
1 starts blinking.
6 is blinking red.
1 lights up blue. The product is
lights up red.
1
w for 5 seconds until you heard the sound.
7
r .
20-6-2022 14:55:03 20-6-2022 14:55:03