Celestron 94038 Manual De Instrucciones página 2

4. Plug any additional AUX port accessories you wish to use
into the available AUX port(s) on the controller (Fig. 3)
SKYPORTAL AUX POWER CABLE
WiFi MODULE
FIG. 3: AUX POWER CABLE POWERING ADDITIONAL ACCESSORIES
5. Turn on the controller. The accessories connected to the
AUX ports will also receive power.
Using the Cable with the
Celestron SkyPortal WiFi Module
When you plug the SkyPortal WiFi Module into one of the
controller's AUX ports, you can connect your PC to the
controller wirelessly using Celestron's free CPWI software.
You can download CPWI at: celestron.com/cpwi
1. Make sure the SkyPortal WiFi Module is set to "Direct
Connect" mode. (Refer to the SkyPortal WiFi Module's
manual at celestron.com for more information.)
2. Turn on the controller.
3. Connect your PC to the WiFi module's network. To do
this, view your PC's available WiFi networks and connect
to the network labeled "Celestron-###. "
4. Open CPWI and select the Connection icon in the upper
left corner of the screen. Select "WiFi. " CPWI will now
connect to the controller, and you can use CPWI to see
real-time data and adjust settings under the Dew Heater
menu. Refer to the controller's manual for more details.
Using the Cable with the
Celestron Focus Motor
If you wish to use the Celestron Focus Motor, simply use
its included AUX cable to connect the motor to one of the
controller's AUX ports. You can control the Focus Motor
with CPWI or the Celestron Focuser Utility program. Refer
to the Focus Motor's manual at celestron.com for more
information.
Specifications
FOCUS
MOTOR
CABLE:
BARREL CONNECTOR FOR
POWER PORT:
MODULAR CONNECTOR FOR
AUX PORT
FCC NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Product design and specifications are subject to change without prior notification.
This product is designed and intended for use by those 14 years of age and older.
©2022 Celestron. Celestron and Symbol are trademarks of Celestron, LLC.
All rights reserved. • Celestron.com
2835 Columbia Street, Torrance, CA 90503 USA
This product is designed and intended for use by those 14 years of age and
older.
Made in China
celestron.com/pages/warranty
Coiled cable, 250mm long
5.5mm inner diameter / 2.1 outer
diameter
RJ-25 plug, 6P6C
ENGLISH | 2
1022