Publicidad
Idiomas disponibles
Idiomas disponibles
2.
TOILET INSTALLATION
5. Reconnect the water connection hoses on the
toilet seat. Hand tighten the fitting and then turn
an additional 1/4 turn with wrench.
Parts Used
A
Toilet
Hardware Used
GG
Wrench
6. Re-install the toilet seat by aligning the two
connection post and pressing firmly on the seat.
Parts Used
A
Toilet
3.
WATER SUPPLY INSTALLATION
1. Connect the toilet water inlet hose with
the angle valve.
2. Open the angle valve to check for water
leakage at connection points.
Parts Used
A
A
Toilet
Hardware Used
HH
Angle Valve
5
x 1
x 1
6
x 1
A
x 1
x 1
11
HH
A
A
Toilet Water
Inlet Port
Water
Inlet Hose
(Pre-install)
Constant
Valve
Angle Valve
(Special)
Publicidad
