Commercial Electric S-LINCUS1-US-1-K1 Guía De Uso Y Cuidado página 6

Operation
1
Turning the fixture on Turning the fixture on Turning the fixture on Turning the fixture on
□ Upon plugging the unit into a power source, the
fixture(s) can now be turned on.
□ Press the in-line on/off button switch (C) once to
turn on the fixture(s) to 100% brightness
NOTE If multiple fixtures are linked, the first in-line switch
will control all linked fixtures.
IMPORTANT: : : : If the connected fixtures begin to flash,
the power supply may be overloaded. Please refer to the
"Pre-Installation" section for linking guidelines.
3
Turning the fixture o Turning the fixture off ff ff ff
Turning Turning the fixture o the fixture o
□ Once dimmed, press the in-line on/ off dimmer
button switch (C) a third time to turn off the
fixture(s).
Using the on/ off dimmer Using the on/ off dimmer Using the on/ off dimmer Using the on/ off dimmer
2
button switch button switch button switch button switch
□ The in-line on/off dimmer button switch (C)
also acts as a step dimmer.
□ Once turned on, press the button a second
time to reduce the brightness from 100%
brightness to 50% brightness.
6