Publicidad
Idiomas disponibles
Idiomas disponibles
TYPHOON 3
OPERATION GUIDE
FZVAAK-3
GETTING
STARTED
Setting up your
sprayer
NOTE:
The sprayer may
have residual water in it
when first opened. This is
due to quality testing every
sprayer undergoes before
leaving our factory.
1
Take off the tank lid (1).
Remove
the
nuts
and
bolts (6), holsters (4, 5)
and nozzles (13, 14, 15)
from the tank strainer (3).
Set aside.
3
A
Next, slide the adjustable strap through the top tank loop.
Continue by sliding the strap under and over the buckle
fitting. Lightly tug to make sure the strap is secure. Repeat on
other side.
- 10 -
© WESSOL, LLC 2022
2
Bring the ComfortStraps™
(11) to the bottom of the
tank. Secure the lower
strap clips to the loops at
the bottom of the tank.
B
C
Publicidad
