Descargar Imprimir esta página

Honeywell HWS200 Manual Del Usuario página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Clean the post filter (B) outside by blowing air backwards through it and/or shaking it
rapidly up and down.
AFTER USE, STORAGE
1. Store vacuum cleaner above freezing temperature, 32°F / 0°C.
2. See Figure 12.
a. Place the hand tube in the holder for hand tube (A)
b. The crevice tool / brush tool can be stored on the machine (B)
c. Place cord on cord hook (C)
WARNING:
When not in use: disconnect the power cord from the electrical outlet.
TROUBLE SHOOTING
Repair or service of electrical components such as cord or motor, must only be carried out by an
authorized service center.
Vacuum cleaner does not
start:
Motor stops:
Check to see that the plug is correctly inserted in the
electrical outlet and that there is power at receptacle.
A circuit breaker may have tripped. Check the circuit breaker
box.
The cord or plug may be damaged. Call the Customer
Service Department to get the nearest authorized service
center.
A thermal overload protector will shut off the motor if the
motor temperature is too high. If this occurs, turn the switch
Figure 12
11

Publicidad

loading