SISER Romeo Manual Del Usuario página 8

5
Cut not deep enough
and can't be weeded
9
Once you're ready to cut, plug in the USB flash drive
via the USB-A port on the rear of the cutter. Tap the
'Settings' button, then 'USB'. Select your cut file*
from the drop down.
*Visit siserna.com for info on accepted file types
10
Congratulations— you've cut your first design! To learn
how to apply your design, visit www.siserna.com.
Access advanced designer tools, inspirational projects,
Identifying a Good Test Cut
Material and carrier
Ready to use your cutter to its full potential?
tutorials, and more by downloading
Leonardo
cut through
Move the position of the
blade by using the
SETTINGS
on-screen arrow buttons.
CUT SETTINGS
Once the blade is in
position, tap the play
TEST CUT
button to begin cutting.
Design Studio.
TM
Material cut and
carrier not cut through