VOSS garden HD5500+ Instrucciones De Uso página 17

INSTRUCTION MANUAL VOSS.GARDEN HD5500+
No Element
LED
8
indicator
10 USE
1. Switch on via the volume control (1).
2. Turn the sensitivity control (5) to the HIGH position.
3. Turn the discrimination knob (6) to a position that suits your needs. The following table can be
used as a reference to the different positions:
LOW
1 o' c lock position
5 o' c lock position
HIGH
4. Hold the search coil parallel to the ground at a distance of approx.
1‑5 cm (see illustration).
5. Swing the search coil from side to side in slow overlapping
movements. Overlap each search to get the best possible
coverage.
Info
The metal detector needs the movement of the search coil
to detect metals.
As soon as a metal is detected, the pointer indicator (7) moves
to the right, the LED indicators (8) flash and the buzzer sounds.
Info
With the help of the discrimination control (6) you can see
what kind of metal was found.
10.1 LOCATING A FIND MORE ACCURATELY
1. To locate a find more accurately, hold the search coil 50 cm or more above the ground and press
and hold the button (4).
2. Move the search coil over the area that has been covered.
3. When the buzzer sounds, release the button (4).
4. Wait approx. 1‑2 seconds and then press and hold the button (4) again.
The buzzer switches off.
5. Keep button (4) pressed and move the search coil closer to the ground.
6. Repeat steps 3‑5 until you have accurately located the target area.
As soon as the search coil is closer to the target, the LED indicators (8) light up clockwise.
82220 - 11.2022 - V1
Function
∙
If a metal is found, the LED lights come on
∙
If no metal is detected, the LED lights up every 10 seconds, signalling
standby mode
All metals can be detected
Iron is excluded
Nickel is excluded
Only silver is recognised
DE
EN
FR
IT
NL
ES
PL
17