Publicidad
Idiomas disponibles
Idiomas disponibles
Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing power
tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are danger-
ous in the hands of untrained users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) Service
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Hold the power tool by insulated gripping surfaces,
because the sanding surface may contact its own
cord. Cutting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
The machine shall be used in a covered and dry
area. The ambient temperature shall be included
between 0°C and 40°C.
If the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
2. Layout and Unpacking
2.1 Layout (Fig. 1)
1. ON/OFF switch
GB
2. Tool chuck
3. Speed controller
4. Quick-release lock for changing tools
5. Air vents
6. 1pc 1-3/8" BI-Metal wood/metal blade
7. 1pc 1-3/8 Precision Wood and Plastic saw blade
8. 1pc 3-1/2" Semicircle BI-Metal wood/metal saw
blade
9. 1PC 3-1/2" Semicircle Wood and Plastic saw blade
10. Scraper
11. 1pc 2-3/4" Precision Wood and Plastic saw blade
12. Sanding pad (80 x 80 x 80mm)
13. Sanding sheet (60, 80, 120, 180, 240 grit each 2)
2.2 Items supplied
Please check that the article is complete as specified
in the scope of delivery. If parts are missing, please
contact our service center.
Open the packaging and take out the equip- ment
with care.
Remove the packaging material and any packaging
and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect
the
equipment
transport damage.
If possible, please keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils
or small parts. There is a danger of swallowing or
suffocating!
3. Proper use
The equipment is designed for the sanding/grin- ding
of wood, iron, plastic and similar materials using the
appropriate abrasive paper. Furthermore, the equipment
is intended for sawing wood, plastic, metal and similar
materials using the appropriate blade, as well as
scraping off glued carpets, filling compound residues,
old paint and similar applications.
The equipment is to be used only for its prescri- bed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or inju- ries of any kind
caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5
and
accessories
for
Publicidad
