Zi JORDI Manual De Instrucciones página 5

1
Install the front and the front
forks into the head tube
of the body
4
First install the brakes on the frame
slot, then insert the rear wheel into
the clamp
7
lnstalI the awning, put the hood into
the seat frame and pop the bean
10
Insert the front end of the steering
wire into the front fork deflector, insert
the rear end into the steering rod and
fix it with screws
INSTALLATION STEPS
2
Mount the front basket
on the front fork
5
lnstalI the seat, insert the seat screw
into corresponding screw hole, and fix
it with the black knob.
8
Push the back pusher into the rear
steering lever and align the direction
11
Install the rear basket and firmly
pull the storage basket into the
corresponding position as shown in
the figure
3
Put the front handle into the front
basket and align the screw holes to
tighten the screw cap
6
Install the guardrail and connect it to
the seat. Put on the cushion and lock
the safety lock.
9
Turn the rear wrench inside the ring
to lock it up
12
The installation is complete
5