wad TW003 Manual Del Usuario página 4

Technical specifications
Nixe Black Silver
Cutting Machine
(MODEL TW003)
· Input voltage of AC/DC adapter 100-240 V
· Frequency 50/60Hz, 0,2 A
· Power 10 W
· Speed 7000 rpm
· DC motor
· 1800 mAh lithium battery
· 150 min usage time
· Charging time 2.5 hours
· 3Cr13 steel blades
· 4 combs 1,5 / 3 / 6 / 9 / 9 mm
· Cutting lengths 0.2 mm
· Lifetime 500 hours
· DC motor
· Weight 171 g
· Noise <68 dB
· Slat temperature <50ºC
· Includes lubricant and brush
BDN Cosmetics S.L. · C/ de la Mora 22
08918 Badalona, Spain
6
Instructions for use
COMPONENTS:
LOWER
BLADE
UPPER
BLADE
ON/OFF
BUTTON
PROTECTIVE
OF BLADES
LUBRICATING
CHARGER
OIL
4 COMBS
How to load the machine
UNIVERSAL
BRUSH VOLTAGE
CHARGER
Connect the charger cable to the connector
1
at the bottom of the cutting machine.
Connect the power plug to the mains. The
2
indicator light on the cutting machine will
illuminate red. When the light changes to
green, charging is complete.
Before using the machine for the first time, fully
charge the battery. Once the battery is charged, do
not keep the machine connected to the mains for
any longer. Turn the button to the ON position and
you can start using it.
7