Turning On/Off - Xiaomi Mi Robot Vacuum-Mop Essential Manual De Usuario

Turning On/Off
Press and hold the bu on " " for 3 seconds to turn on the vacuum-mop. The indicator will turn white and you will hear a voice
message indicating that the vacuum-mop is in standby mode.
To turn off the vacuum-mop, press and hold the bu on " " while it is stationary. A voice message will indicate that the
vacuum-mop is turning off.
Note: The vacuum-mop cannot be turned off while charging. If the vacuum-mop is unable to turn on due to low ba ery, manually place the vacuum-mop onto the charging
dock to recharge.
Starting/Pausing Cleanup
Turn on the vacuum-mop, then press the bu on " " to start cleanup.
To pause cleanup while the vacuum-mop is working, press the bu on " ".
Note: The vacuum-mop cannot be used to clean up liquids. If the vacuum-mop is low on ba ery and cannot start cleaning, recharge it to a sufficient level before cleaning. If
the vacuum-mop starts to run low on ba ery during a cleaning task, it will automatically return to the charging dock. Once its ba ery level is sufficient, the vacuum-mop will
automatically resume cleaning where it le off. Before cleaning, tidy up any loose cables on the floor (including the charging dock power cord) to prevent the vacuum from
dragging or ge ing caught on them, which could accidentally shut off electrical appliances or cause damage to objects or cables.
Starting/Pausing Docking
Auto mode: The vacuum-mop will automatically return to the charging dock a er it finishes cleaning.
Manual mode: Press the bu on " " to manually send the vacuum-mop to the charging dock.
When returning to the charging dock, the vacuum-mop's indicator blinks white, or blinks orange if the vacuum-mop runs low
ba ery.
The indicator slowly blinks white while charging, and stays white when fully charged.
Note: If the vacuum-mop is unable to return to the charging dock due to an error, make sure there are no obstacles around the charging dock, then manually place the
vacuum-mop onto the dock to recharge.
12