Publicidad
Idiomas disponibles
Idiomas disponibles
TFA_No. 30.1066_Anl_12_22
Digital indoor-outdoor thermometer
•
Do not expose the device to extreme temperatures, vibra-
tions or shocks. Display unit for indoor use only, protect
it from moisture! Clean the device with a soft damp cloth.
Do not use solvents or scouring agents.
1. Getting started/Operation
•
Remove the protective film and insert a new battery
(1.5 V AAA) with the correct polarity (+ pole to the left).
The indoor temperature appears on the display.
•
To toggle the display to the temperature measured by the
cable sensor (OUT), press the IN/OUT button (under the
stand). Press and hold the IN/OUT button for 5 seconds
to switch on the rotation function
indoor values will appear alternating for 5 seconds.
23.12.2022
. The outdoor and
– 10 –
12:25 Uhr
Seite 6
Digital indoor-outdoor thermometer
•
Press the MAX/MIN button (on the side) to display the
maximum (MAX) and minimum (MIN) temperature since
the last reset and to return to normal mode. Press and
hold the MAX/MIN button for 3 seconds when MAX or
MIN is displayed to reset the value.
•
Display LL.L/HH.H°C: outside measuring range.
•
Remove the battery to turn off the instrument, if you do
not use the device for a while.
•
If your device fails to work, contact the retailer where you
purchased the product.
2. Installation
•
For measuring outdoor temperature: lead the cable with
the sensing element through the open window to the out-
side. Take care of sharp-edged window frames – avoid
frequent opening and closing the window.
– 11 –
Publicidad
