DAY Useful Everyday 75511 Manual De Instrucciones página 10

STREAMING MICROPHONE
Technical data
Voltage:
Frequency Response:
Sensitivity:
Sensitivity:
Equivalent noise level:
S/N Ratio:
Incl. USB cable 1.3 meter
Polar pattern:
Can be adjusted 360° horizontally
Can be rotated 180° angle
Volume control
Volume up: clockwise
Volume down: counterclockwise
Mute: Counterclockwise until endpoint
Keep the volume all the way down when
plugged the mic into USB port, and gradually
turn volume up for the perfect eff ect during
the use.
�������������
�����������
�������
10
Real time monitor
5 V The mic is equipped with a 3.5 mm earphone
output, which allows to monitor input to mic
30 Hz-18 kHz
without delay.
-34 dB ±30%
To use this function you need to insert the
-34 dB ±2 Db
headphone jack into the earphone output.
16 dBA
Remember to change the output of your
78 dB
computer if you want to use speakers at
the same time as you are doing to real time
monitor.
Uni-directional
Computer setup
Apple MAC OS
Plug the free end of the provided USB cable
into the USB port on your computer.
Your computer will automatically recognize
the USB device and install a driver.
1. To select the MICUSB1 as your audio input,
fi rst open your System Preferences.
2. Next, click Sound to display Sound
Preference pane.
3. Click the Input tab and select MICUSB1 as
the device for sound input.
Notice: If you want to monitor your voice
when using Macbook, you must turn on
any recording software fi rst (Audacity, for
example). Make sure to click "Software Play
(on)", then click the Record button to begin,
otherwise you cannot hear any sound when
you speak into the mic. If the computer is
not able to identify this USB device, please
restart the computer and replug the mic into
another USB port.