sauermann TM 210 Guía Rápida página 3

Add a wireless probe
OK
With arrow In "Information"
keys, go to menu go to
"Information" "Wireless probe"
menu
The probe information is displayed with Pairing is in
the function key "Meas." It is possible
to back to the measurement screen. It is
also possible to delete the wireless probe
pressing the function key "Delete".
4 Start and record datasets
The instrument in on.
Select with arrows keys "Measurement" menu. Press OK.
Select with arrows keys the measurement in which the dataset will be
performed.
Press "Functions" key then select "Dataset" with arrow keys and
press OK.
Dataset menu is displayed.
Go to line "Name" with arrow keys and press OK.
A keypad is displayed on the bottom of the screen.
Select the letters with arrow keys then press OK.
To go from the lower case keypad to the upper case keypad then to
the numeric keypad, press the function key:
To delete a letter press the function key "Delete".
Press the function "Validate" to validate the name of the dataset.
A dataset is composed of several dated measuring points.
You can choose between an automatic dataset or a manual dataset.
Go to "Type" with arrow keys then press OK.
Select "Manu." for manual or "Auto." for automatic.
Go to "Start" then press OK.
On the bottom
of the screen
press the
OK
function key
"Create"
Turn on the wireless
progress probe and keep it press
until the light blinks
View the recorded datasets
Go to the "Dataset" menu with the arrow keys from the home screen.
The different measuring datasets are displayed. They are listed by date.
To delete all the datasets: press the function key "Del all".
To delete just one dataset: go to the dataset to delete with the arrow
keys and press the function key "Delete".
A confirmation window opens: select YES to confirm the deletion or NO
to cancel.
Launch averages
The instrument is on.
Go to "Measurement" with the arrow keys.
Press OK.
Press the function key "Functions" then select "Averages" then press OK.
"Average" menu is displayed.
5 Hold-Min./Max.
Go to "Measurement" menu with the arrow keys and press OK.
Measurements are displayed.
Press OK.
Measurements are frozen on the screen and the minimum and maximum
values are displayed.