Publicidad
Idiomas disponibles
Idiomas disponibles
EN
SAFETY INFORMATION
Please observe all safety instructions!
01. Unplug the power cord in
07. Never open the enclosure
case of smoke, smell or
of the control unit or power
unusual noise.
supply. Unauthorised opening
of the enclosure or improper
02. A minimum gap of 25mm
repairs may endanger the
must be present from the
user and voids all warranty
edge of the work surface
claims.
to adjacent objects. This
includes organisational
08. Only professionals authorised
elements and building
by the manufacturer may
structure.
carry out installation,
maintenance or repair.
03. Make sure no objects or parts
of the body get caught when
09. This product must be cleaned
operating the motor.
with a damp cloth only.
04. The work surface must not
10. This product should not be
be adjusted in height if other
used by children.
people are located directly in
11.
The manufacturer assumes
its location.
no liability for damage
05. Do not place any objects or
resulting from improper use.
parts of the body between
12. Plugs and connections must
fixed or movable parts.
be located in such a way that
06. In the case of hitting an
no fluids come into contact
obstacle, slight damage
with electrical equipment.
(scratching, pressure marks,
13. The power cable must be
etc.) to such obstacles may
secured. Interconnecting
occur.
cables may be run loosely. All
lines and cables must be run
in such a manner as to avoid
mechanical damage (i.e.
shearing, abrasion...).
04 –
14. Cables must be sufficiently
long enough to allow height
adjustment without damaging
the cables and wiring (i.e.,
stretching, crushing).
15. The operation of the
control mechanism and the
power supply unit requires
a minimum of 5°C and a
maximum temperature of
40°C.
16. Do not use in an explosive
environment.
17.
Do not install the control unit:
•
Above or in front of heat
sources (e.g. radiators)
•
In small, unventilated or
humid rooms
•
Near easily flammable
materials, or near high-
frequency devices (e.g.
transmitters or similar
devices)
USER GUIDE
INSTRUCTIONS
Improper operation of the system may
result in personal injury, injury to others and
cause damage to objects!
The up/down buttons are 'push-to-operate'
and will only function when connected to
power, assembled correctly and the control
box has been initialised. The distance of
travel is defined by the control box.
For every 1 minutes of constant use, the
control box requires 9 minutes of non
operation.
SAFETY AT THE DESK
The user must ensure that the space
around the adjustable top is clear before
use. As mentioned previously a 25mm gap
must be present with any ancillary objects.
This avoids any pinch or crushing points.
User Guide
25mm
– 05
Publicidad
