eSmart MIMOTO Instrucciones De Manejo página 26

Question / Problem
Screen extension is
interrupted
The weighting bar is not
settling precisely in the
retracted position
The remote control is not
responding
26
Solution
• Please clear the programming of the remote control by
pressing the „Up" and „Down" buttons on the remote control
(not on the wall control) at exactly the same time.
• Rolling of the screen usually causes the canvas to unroll
differently on both sides. Thus there may be slight variations
on both sides of the fabric, which results in the weighting bar
having a different distance from the housing on either side.
In the course of its usage life this effect can also change from
one side to the other.
Proceed as follows if you want to use a new remote control
with your control device.
1. Press the „Stop" button on the wall control for 5 seconds.
You will hear an indicating tone.
2. Press the „Stop" button on the remote control for 2 seconds.
You will hear an indicating tone.