tibelec 579110-579120 Instrucciones De Montaje página 8

IMPORTANT: these instructions are for your safety. Read
GB
them carefully before use and keep them for future use.
• Children should be supervised to ensure they do not play with the device.
• Shut off the power at your electrical board.
• Even though this detector is resistant to water splashes, it should still be installed in a
sheltered location.
• Always check that the power of the device to be connected to the detector does not
exceed authorised power.
• This fixture is not designed to be used by people (including children) with reduced
physical, sensory, or mental capacities, or by people lacking experience or knowledge,
unless they are supervised by someone who is responsible for their safety, or are provi-
ded with instructions concerning its use.
• If you have any concerns or problems, consult an electrician or another qualified person.
All the instructions for our products may be downloaded from our website at www.tibelec.fr.
Thanks to this infrared motion detection system, you can automatically light up a
passageway: driveway, garden, etc. Motion in front of the infrared sensor triggers any
device connected to it. If it is a lighting device, it will light up instantly and remain lit as
long as the protected area is occupied. If it is an alarm, it will resonate and continue to
resonate as long as the protected area is occupied. The device goes off automatically
as soon as movement ceases in this area and the timer runs out. This detector uses the
most advanced passive infrared technology, detecting moving heat sources such as
human beings, animals and cars, for a distance up to approximately 12 metres.
1. INSTALLATION
a. Choice of location
If installing the detector outdoors, it should be sheltered from prolonged exposure
8