Descargar Imprimir esta página

Habitat Ruskin 911730 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Top: Solid oak and oak veneer.
Feet: solid oak.
Assembly instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Over time, the fasteners may lose their effectiveness. Periodically
check for loose screws. Retighten if necessary.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.wc
Do not sit on the product.
The wood-based products, particle board, painted, varnished and /
or lacquers may emit an odor when opened. This smell disappears
after a few weeks if the room is properly ventilated.
Maintenance
In order not to damage the surface, it is recommended that you do
not place hot or humid object directly on the surface.
Do not use magazines or newspapers as trivets. The ink used may
leave traces that can permanently stain the furniture surface.
To avoid the appearance of marks, do not leave any stationary
object for more than 2 months.
Avoid placing furniture in the immediate vicinity of a heater
or air conditioner. The heat and humidity can cause cracks or
deformities.
Avoid direct and prolonged exposure of the product to solar
radiation: colors may fade.
If the table is used repeatedly with an extension, it is recommended
to regularly change this extension so that the aging of the wood is
done uniformly on the 2 extensions.
Any spills should be removed immediately with a cloth. Then wipe
the surface with a clean, dry cloth.
The use of furniture polishes is not necessary or recommended.
Clean plating using a soft, damp cloth. Then wipe with a dry cloth.
Do not use abrasive cleaners.
Clean with movements in the direction of the fiber of wood.
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
Ruskin - 04/2022
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
1

Publicidad

loading