Descargar Imprimir esta página

KlipXtreme Titan KBS-200 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

C. Unpairing speaker from TWS mode
Quickly press twice the power/mode button on the master unit, the Bluetooth
second unit will start blinking (a tone will also be emitted). Once you hear the tone, TWS
un-pairing was successful.
V. Using the speaker to answer or end a call
• When there is an incoming call, the speaker will generate a tone to alert you of this
event.
• Briefly press the multifunction button to answer the call on the speaker, you can
talk close to the speaker as the built-in microphone will allow clear voice
reproduction. You may also press the answer button on your phone to take the
call using the speaker.
• To end a call, press the multifunction button once again. Likewise, you may also
end the call directly using the command on your mobile phone.
• When listening to music using your smartphone, playback will resume automatically
once the call has ended.
• Press the multifunction button for approximately two seconds on the speaker in
order to reject an incoming call.
• Press the multifunction button twice to call back the last number dialed on your
phone.
VI. Music playback
LED on the
®
Note: Music playback will work individually or in TWS mode.
• Press the multifunction button to start and stop audio playback.
• Press and hold the + button to play the next track.
• Press and hold the – button to play the previous track.
• In order to adjust the volume level, briefly press the + or – button.
VII. Troubleshooting
Problem
The unit will not power on
Can't hear any sound
Sound from the speaker is distorted
Can't pair the speaker with my
Bluetooth
®
Solution
Make sure the speaker is turned on. Check if the
speaker is fully charged.
Make sure the volume of the speaker is not at
the minimum setting. Make sure the connected
audio device is playing audio.
Lower the volume level of the speaker or the
connected device.
Make sure the Bluetooth
device
turned on. Your Bluetooth
range. Try moving it closer to the speaker. Move
your Bluetooth
from other devices that generate
electromagnetic interference, such as phones,
microwave ovens, wireless network routers, or
other Bluetooth
mode of your device is
®
device may be out of
®
device and/or the speaker away
®
devices.
®

Publicidad

loading