Tiny Geeks Tunes Manual página 8

RADIO & AUX INPUT
USING THE RADIO
Step 1: Press the MODE button and select
RAD, then extend the FM antenna to
improve radio reception.
Step 2: Long press PREV or NEXT buttons
to jump to the previous or next available
station. Short press to manually select the
frequency.
SETTING RADIO STATION PRESETS (AUTOMATIC MODE)
Press and hold the PLAY/PAUSE button to auto-scan available FM
frequencies. All detected frequencies will be saved to presets P01 to P20.
Once the auto-scan has finished, briefly press the PLAY/PAUSE button to
cycle through all saved presets.
SETTING RADIO STATION PRESETS (MANUAL MODE)
Step 1: select the desired frequency using these buttons, as explained
earlier.
Step 2: briefly press the REP button to enter memory mode. When the on-
screen text flashes, wait for 2 seconds, then press the button again to save
the current frequency to a preset (e.g. P01 to 105.3). Note: you can press the
PLAY/PAUSE button while the numbers are flashing to select which preset
you want to save the station to.
Step 3: briefly press the PLAY/PAUSE button to select a preset FM station,
and repeat to move to the next station (P01 to P20).
AUXILIARY PORT (IN)
Step 1: connect a 3.5 mm
cable (not included) to the
AUX
port on the TinyGeeks
Tunes.
Step 2: Connect the other
end to the output auxiliary
port on your device (such as
an Mp3 player)
6
RAD
AUX
Step 3: Press the MODE
button to select AUX mode.
Audio played through the
connected device will now
sound through the
boombox.