Denver IFM-90 Manual De Instrucciones página 10

• Make sure the supplied adapter is properly connected to a 100-240V
50/60Hz household AC power outlet.
• Make sure that the minimum distance around the whole unit for sufficient
ventilation is 10cm.
SETTING THE CLOCK AND DATE
When the system is connected to the AC outlet for
the first time, time '0:00' & Date '1- 01' will show on
the display.
1. In the Standby mode, press
or MODE on the remote until the unit enters the
clock set mode. '24H' will flash on the display
indicating that the clock is set for 24-hour cycle.
2. Press or on the top panel or the remote once
to change the clock format to 12-hour cycle. The
display will change from '24H' to '12H' .
or MODE to confirm. The hour digits '12'
3. Press
will flash. Repeatedly press
Press or MODE to confirm.
4. When the hour is confirmed, the minute digits
'00' will flash. Repeatedly press
minute. Press
5. When the clock time is set, the year digits will
flash. Repeatedly press
or MODE to confirm.
Press
6. '1' in the Date box will flash for the month setting.
Repeatedly press
or MODE to confirm.
Press
7. 01' in the Date box will flash for the day setting.
Repeatedly press
MODE to confirm.
SETTING THE ALARM 1 AND 2
You can only set your Alarm mode in the Standby mode.
Setting Alarm 1
OPERATING INSTRUCTIONS
on the top panel
or
or MODE to confirm.
or
or to set the month.
or to set the day. Press
to set the hour.
or to set the
to set the year.
or
- 7 -