Descargar Imprimir esta página

V-TAC VT-ST42 Instrucciones De Instalación página 4

Publicidad

INSTALLATION A: STRAIGHT POLE
(Default installation method, accessories included)
Before starting the installation, ensure the 4 bottom screws are tightened.
Remove the gaskets of small U-shaped brackets, then insert them to lamp bracket
across the straight pole.
To adjust the angle of the lamp, loosen the screws from both sides of lamp (as shown
in the above image)
and adjust the lamp angle, adjustable by upwards 20° and downwards 10°. Then tighten
the screws of the lamp.
LED SOLAR STREETLIGHT
EN
1
3
2
20°
10°
Loosen the screws
here to adjust angles.
4

Publicidad

loading