Measuring Procedures - Kerbl topTemp Instrucciones De Uso

Operation Manual
EN
LCD

Measuring Procedures

It is very important that probe tip be placed in the right location, as instructed and
illustrated on illustrated.
1. Turn on the thermometer by pressing the button.
2. LCD will show some characters as illustrated below.
3. Wait for 2 beeper sounds and the unit is now ready to use.
4. In selecting the °C or °F value by pressing the button for 2
Seconds when °C or °F symbol is flashing.
< 32,0°C (89,6°F)
> 42,0°C (107,60°F)
1. Do not measure when the temperature is not stable.
The normal mode will be auto-changed immediately.
2. Short circuit / breakdown
3. Temperature over 50.0°C (122.0°F)
Power for Operation Indicator
Lower Battery Indicator
11