ASSEMBLY INSTRUCTIONS
1. Insert 7 x 70 screws (AA) and tighten to connect leg
frame into the crossbar (C). Repeat this step for the
other leg frame.
Hardware Used
AA
7 x 70 Screw
2. Use slots on crossbar (C) to connect leg frames (B).
3. Connect the top frame (A) to the leg frame (B) by
inserting the 8 x 18 nuts (CC) and 8 x 35 bolts (BB)
and tightening.
Hardware Used
BB
8 x 35 Bolt
x 4
CC
8 x 18 Nut
x 4
1
C
x 4
2
B
C
C
3
CC
BB
CC
A
Lowes.com/allenandroth
4
CARE AND MAINTENANCE
• Storage during winter: Wood can shrink and expand depending on the humidity. This furniture has
been manufactured and designed for a summer climate. Do not store this product in centrally heated
rooms, as this will cause the timber to dry out and possibly shrink and crack. Cool, well-ventilated
sheds are the most suitable location.
• After the wood has been in use for a period of time or has dried out, it may be necessary to tighten
(with only moderate torque) the screws. Use a hexagonal wrench.
AA
WARRANTY
• This outdoor furniture is warranted by the manufacturer to the original purchaser for a period of one
(1) year from the date of purchase against defects in workmanship and materials only. If your outdoor
furniture fails structurally during normal use within one (1) year of purchase, the manufacturer will
repair or replace the defective piece at its discretion (with the same or similar product if original
product is discontinued) at no charge.
• Proof of purchase (dated cash register receipt) is required for warranty claims. See the full warranty
document supplied with the furniture for more details and warranty exclusions.
BB
Printed in Vietnam
allen + roth
®
is a registered trademark
of LF, LLC. All rights reserved.
Lowes.com/allenandroth
5