Wellclima KT-B03 Guia Del Usuario página 2

Dear customer, we thank you for purchasing this product.
The remote control is compatible with the best brands of air conditioners on the market.
Read these indications carefully before operating the remote control.
1. Preparation of the remote control
- Slide the back cover down and open.
Insert 2 batteries (type AAA), paying attention to the polarity indicated in the battery compartment.
2. Programming the remote control
2.1 Directly entering the brand:
- Press and hold the SEL button until the abbreviation appears in the lower part of the display.
Select the abbreviation corresponding to your brand using the + and - buttons (check the corresponding abbreviation
on the back of the packaging).
- Press OK to confirm the setting.
- If the remote control does not work well, or not all functions are available, point the remote control towards the air
conditioner, press and hold the OK button until you hear the sound of the air conditioner buzzer. Try the remote
control again. If necessary, repeat the operation until the remote control works perfectly.
2.2 Automatic search completion:
- Point the remote control towards the air conditioner after selecting the brand on the display, and press and hold the
OK button. Release the button quickly as soon as you hear the sound of the air conditioner buzzer. Try all the
functions. If necessary, repeat the operation until the remote control works perfectly.
2.3 General automatic search:
- Point the remote control towards the air conditioner. Press and hold the SEL button until the abbreviation appears
in the lower part of the display. Press and release the SEL button at approximately 1 second intervals until you hear
the sound of the air conditioner buzzer. Try the remote control. If not all functions are available, repeat the operation
until the remote works perfectly.
3. Setting the clock
- Press the CLOCK button for 2 seconds. The time on the display will start to flash. Press the + and - buttons until the right time is displayed. Confirm by
pressing OK.
4. MODE: Operating modes
Press the MODE button to set the operating mode, which is shown by a symbol in the upper part of the display. From left to right, the symbols have the
following meanings: air recirculation (if this function is available), cool, dehumidify, fan only, heat (with heat pump function).
5. FAN: Setting the fan speed
Use the FAN button to set the fan to 3 different speeds + an automatic speed (i.e. the air conditioner adjusts the speed automatically to target conditions and
temperature).
6. SWING: Activates automatic movement of the air direction vanes.
7. VANE: Adjust the air direction vanes.
8. TIMER OFF programming
With the air conditioner on, a power-off time can be set.
WARNING! The time is memorized in the remote control, which, at the set time, will send the OFF signal to the air conditioner. It is therefore essential that
the remote control remains within range so that the air conditioner can receive the signal.
8.1 TIMER OFF: Press the TIMER OFF button. The time on the display will start to flash. Press the + and - buttons until the desired time is displayed. Confirm
by pressing OK.
CONDITIONER
TEMPERATURE
TIMER OFF- CLOCK
BRAND CODE
Distributed by KOOMANDO Srl - via Giovanni Paolo II, 45/C - Azzano Mella (BS) - 030 974 54 00 - info@wellclima.com
KT-B03
Remote control for
air conditioners
UNIVERSALE
UNIVERSAL A/C
MODE
FAN
DIRECTION
AND SWING