Publicidad
Original Bedienungsanleitung FUXTEC FX-MS152T_de_en_fr_ita_es_rev05
METAL BLADE USAGE
NOTE
Choose a suitable recommended cutting attachment according to the object to be cut.
WARNING
• When sharpening, removing, or reattaching the blade,
be sure to wear thick, sturdy gloves and use only proper
tools and equipment to prevent injury.
1. Check the bolt to fasten the blade and be sure the bolt
has no fault, and no abrasion.
2. Be sure that the blade and the holder have been
fastened according to instruction and the blade turns
smoothly without abnormal noise.
WARNING
• The rotating parts fastened incorrectly may
cause serious accident to the operator.
• Make sure that the blade is not bent, warped,
cracked, broken or damaged.
• If you find any error to the blade, discard it and
change new one.
• By using the harness, hang the unit on your right
side. Adjust the harness length so that the cutting head may become parallel to the
ground.
WARNING
• Make sure to use harness and cutting
attachment guard. If not, it is very dangerous
when you slip or lose your balance.
47
Publicidad
