Publicidad
Installation
3. Connect the 24-Pin ATX cable to the motherboard.
4. Connect the 4+4-Pin EPS12V cable to the motherboard.
5. Connect the 6/6+2-Pin PCI-E cables to your graphics card(s).
NOTE :
Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin connector
without first detaching the two extra pins.
6. Connect SATA power cables to all data drives or optical drives (hard drives,
solid state drives, optical drives).
7. Connect the peripheral "Molex" 4-Pin connectors for fans, pumps, legacy
components and other devices/adapters.
8. Connect the AC power cord to your power supply and to the wall. Check all
connections to assure a solid connection and turn the power switch on the
power supply to the ON position.
03
Publicidad
