Publicidad
FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:
- ATTENTION: If your equipment has a power cord with a grounding plug, it must be
connected to a wall outlet with a ground connection. Never remove the grounding plug
from the power cord.
- If your equipment has been exposed to extreme temperature changes, allow it to reach
room temperature before turning it on. Otherwise, moisture and condensation may
damage the equipment.
- Before plugging in the equipment, make sure that the voltage and frequency of the
power outlet match the specifications of the equipment. If the equipment has a voltage
selector, only connect it to the power outlet if the values match. If the power cord or
adapter does not fit your outlet, contact an electrician.
- Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or
equipment connection.
- Keep the power cord or adapter within reach and disconnect the equipment from the
power supply when not in use or when cleaning it. Always unplug the cord or adapter by
pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
- Avoid frequently turning the equipment on and off, as this can reduce its useful life.
- IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse
repeatedly blows, contact an authorized service center.
- To completely disconnect the equipment from the power mains, unplug the power cord
or adapter from the outlet.
- If your device has a Volex power connector, the mating Volex connector must be
unlocked before it can be removed. Be careful when laying cables, as the equipment can
slide or fall if the power cord is pulled.
- Unplug the power cord or adapter before an extended period of disuse or in case of
lightning strike risk.
- Only install the equipment when it is disconnected from the power source.
- To prevent damage and overheating, qualified personnel should regularly clean and
service the equipment depending on ambient conditions like dust, nicotine, and fog.
If the product contains the following symbols, please, read carefully:
CAUTION
CAUTION: To reduce the risk of electric shock, do not remove cover (or
Risk of Electric
back). There are no user serviceable parts inside. Maintenance and repairs
Shock.
Disconnect all
power sources
should be exclusively carried out by qualified service personnel.
before servicing
The warning triangle with lightning symbol indicates dangerous
uninsulated voltage inside the unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating
and maintenance instructions.
IMPORTANT INFORMATION
WARNING! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS
1. This product is specifically designed for use in event technology and is not intended to
be used as household lighting.
2. It is important to avoid looking directly at the light beam, even for a short period of
time.
3. Optical instruments, such as magnifiers, should not be used to look directly at the
beam.
4. If you are sensitive to strobe effects, it is possible that they could cause an epileptic
seizure. If you have epilepsy, it is important to avoid places where strobe lights are being
used.
www.audibax.com
Monster 200 Hybrid
2
PRO
DMX Channels
18 Channel Mode
CH
Function
DMX Value
1
Pan
0-255
2
Pan fine
0-255
3
Tilt
0-255
4
Tilt fine
0-255
5
Pan/Tilt
0-255
6
Dimmer
0-255
0-3
4-99
7
Strobe
100-149
150-199
200-249
250-255
0-19
20-39
......
8
Color wheel
160-179
180-199
200-226
227-278
229-255
0-4
5-54
9
Static gobo
55-154
wheel
155-204
205-205
206-255
0-9
10-79
10
Rotation gobo
80-159
wheel
160-206
207-208
209-255
Rotaion gobo
0-127
11
rotates
128-191
192-255
12
Prism
0-255
0-127
13
4 Facet prism
128-190
rotation
191-192
193-255
14
Frost
0-255
15
Focus
0-255
16
Zoom
0-255
17
Marco effect
0-255
18
Reset&Macro
0-255
www.audibax.com
Monster 200 Hybrid
Details
Pan movement
Pan fine
Tilt movement
Tilt fine
Pan/Tilt speed control from fast to slow
Dimmer from dark to bright
No function
Strobe from slow to fast
Pulse strobe from slow to fast
Thunder strobe from slow to fast
Random strobe from fast to slow
Light on
Color 1 linear control
Color 2 linear control
..................
Color 9 linear control
Open linear control
Color wheel colockwise rotation from fast to slow
No function
Color wheel anti-clockwise rotation from slow to fast
Open
10 Static gobo(Each 5 DMX value is a gobo)
10 static gobo shake effect(Each 10 DMX value is a gobo)
Static Gobo wheel colockwise rotation from fast to slow
Stop
Static Gobo wheel anti-clockwise rotation from slow to fast
Open
7 Rotation gobo(Each 10DMX value is a gobo)
7 Gobo+open shake effect (Each 10 DMX value is a gobo)
Gobo wheel clockwise rotation from fast to slow
Stop
Gobo wheel anti-clockwise rotation from slow to fast
Change position
Clockwise continious rotation from fast to slow
Anti-Clockwise continious rotation from slow to fast
0-127 no prism, 128-255 prism
Change position
Clockwise continious rotation from fast to slow
Stop
Anti-colokwise continious rotation from slow to fast
0-127 no frost, 128-255 frost effect
Focus
Zoom
0-10 No function, 11-130 is auto focus(In Auto focus, please operate
against the Zoom function, and 15
th
channel focus is just focus fine
control) 131-160 System detection, 161-190 Auto 1, 191-220 Auto 2, 221-255
Sound activated
0-250 No function, 251-255 Reset within 5 seconds
15
PRO
Publicidad
