Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1.Take off cap nuts (BB). Then attach the crossbar
(AA) by tightening the machine screws (DD)
securely into the outlet box (not included). The
mounting screws (EE) should protrude away from
the outlet box.
Hardware Used
Crossbar
AA
BB
Cap nut
Machine screw
DD
Mounting screw
EE
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers, black
to black (power) and white to white (neutral).
Attach copper wire to ground wire. Helpful
hint: If necessary, attach copper ground wire
to grounded junction box.
3. Attach wire nuts (CC). Tape wire nuts (CC)
and wires together.
Hardware Used
CC
Wire nut
1
x
1
x 2
BB
x 2
DD
x 2
2
3
x 3
CC
Lowes.com/portfolio
4
ASSEMBLY INSTRUCTIONS
4. Screw threaded nipple and nut (KK) into bottom
of wall fixture (A). Place the round tube (LL)
and large font (II) and small font (MM) through
threaded nipple and nut (KK). Then tighten with
knob (HH).
Hardware Used
HH
Knob
II
Large font
AA
Threaded nipple and nut
KK
EE
LL
Round tube
Small font
MM
5. Install light bulb (not included). Use one 100-watt
max. standard-base bulb or one 23-watt standard-
base CFL bulb.
6. Remove decorative nut (FF). Place decorative end
(JJ) onto the fixture (A). Secure with decorative
nut (FF).
Hardware Used
Decorative nut
FF
Decorative end
JJ
4
x1
KK
x1
LL
x1
II
x1
HH
MM
x1
5
6
x2
x1
Lowes.com/portfolio
5
A
FF
JJ
A
Publicidad
