Boston Acoustics TVee 22 Manual Del Usuario página 16

using the remote control learning function
4. Learn another code.
When you see the yellow light breath again, you are ready to select your next function to learn by
repeating steps 1–3.
Exiting remote control learning Mode
Press and hold the Input and Volume up button on the sound bar again for about 5 seconds. When
you hear a two-note tone, release the button.
Note: The sound bar will automatically exit IR learn mode if it has not received any IR commands for
60 seconds. All learned IR commands will automatically be saved.
Clearing learned remote control Codes
Press and hold the Input and Volume up button on the sound bar for about 10 seconds. You will hear
a two-note tone. Continue holding the button and release the button after you hear a three-note
tone.
16