Descargar Imprimir esta página

Sagi 3241730 Manual De Uso página 73

Vitrinas verticales refrigeradas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 90
Lift the unit with a forklift and move it to its place of installation paying close attention that the load is well
balanced.
Place the unit in its permanent location.
Adjust the leveller feet found under the unit so that it does not shift or rock.
WARNING: Position the unit at least 10 cm away from the rear wall. It is possible to place units side by side,
yet in any case there must be at least 5 cm space between one unit and another.
min.
min.
10 cm
5 cm
min.
5 cm
WARNING: Make sure that the unit is not exposed to direct sunlight, or any other sources of heat nor placed in
environments with high temperatures; any of these would cause the unit to wear more quickly and perform poorly.
The units have been declared to be in the 4 (T = 30° C U.R. = 55%) climate class.
Remove protective film from product.
This may cause unpleasant static electricity discharge which, however, is not dangerous.
The inconvenience is reduced or prevented by continuously holding the refrigerator with one hand or
grounding the package.
5

Publicidad

loading