These instructions are designed for the installation
engineer to assemble the product and for the user
to operate and maintain it.
After installation, please pass them on to the
user for safekeeping.
Compatible cisterns from the following manu-
facturers
- Geberit
- Grohe
- Sanit
- TECE
- Viega
Intended use
Retrofi t electronic remote fl ush for the drop down
supporting rail 35003 XX0XXX.
The product is suitable only for mounting indoors!
Caution! Only install in frost-free rooms.
Technical data
– Supply voltage:
– Radio frequency:
– Max. power consumption:
– Protection category:
– Ambient conditions:
Temperature
Declaration of conformity! This product complies
with the requirements of the valid EU Guidelines.
The declaration of conformity for this product can
be requested from the following address:
KEUCO GmbH & Co. KG, Oesestraße 36,
D-58675 Hemer.
Important information, please make sure to read!
3.6 V
868,4 MHz
5 mW
IP20
5° – 40° C
Mounting dimensions, see page 1
Installation, see fi gure 1 onwards on page 11
Operation
After establishing the electronic remote, the fl ush is acti-
vated by touching the symbol on the radio trigger.
Establishing radio connection to the fl ushing system
See also the cistern manufacturer's instructions.
– Briefl y press the button on the electronic remote of the
cistern. The control light on the radio module of the
fl ushing system fl ashes 1x.
– Press the radio release on the drop down supporting
rail within 30 seconds. The control light on the electro-
nic remote of the cistern fl ashes 3 times.
The radio connection is established and the radio release
is ready for operation.
Spare parts
Battery, order no.: 32390 000100
If there is no triggering, the battery must be replaced.
Disposal information! Equipment with this
labelling must not be disposed of in household
refuse, but must be disposed of at a collection
centre intended for this purpose.
EN
3