Publicidad
Idiomas disponibles
Idiomas disponibles
Now drill the mounting holes (ø approx. 7 mm,
depth approx. 36 mm).
CAUTION! Make sure that you do not dam-
age any electrical cables during this operation.
Insert the dowels
9
Insert the screws
8
tighten them. Screw heads should apart from
wall approx. 5 mm (Fig. B).
Attach the product to the secured screws
Initial operation
CAUTION! Never hang the product up by the
mains lead!
Hang up the product by means of the mount-
ing hook
at the greatest possible distance
1
from a source of light. Here an installation
height of approx. 1.50 m has been shown to
be ideal.
Insert the mains plug into the socket. (Turn on
the On/Off switch
The product is ready to use. The UV light lures
the insects and contact with the electric high-volt-
age grille
kills or dehydrates them. Dead in-
3
sects are collected in the collection tray
Please rotate cleaning brush
wise direction 90 degree to facilitate pulling
out cleaning brush
Cleaning and care
CAUTION! DANGER OF ELECTRIC SHOCK!
First remove the mains plug from the socket.
Allow the product to cool down completely.
If the product is subject to heavy use it must be
cleaned every three weeks.
CAUTION! DANGER OF ELECTRIC SHOCK!
For reasons of electrical safety the product must
never be cleaned with water or other liquids or
immersed in water.
O nly a dry, lint-free cloth should be used for
cleaning.
D o not use any solvents, petrol or similar items.
This would damage the product.
16 GB/IE
into the drilled holes.
into the dowels
and
9
8
for model HG08724B.)
6
.
4
in anticlock-
5
from clip easily.
5
For Model HG08724A:
Remove the collection tray
product by turning it to left as far as it will go.
For Model HG08724B:
Remove the collection tray
product by pulling out.
The collection tray
Please return collection tray
.
product before use
I f insects become stuck in the high-voltage grille
, remove them carefully with a enclosed
3
cleaning brush
IMPORTANT! If two wires touch each other,
this will destroy the item.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and fibre-
board/80–98: composite materials.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
at bottom of
4
at bottom of
4
can now be emptied.
4
into bottom of
4
without bending wires.
5
Publicidad
