Publicidad
WiFi Module: Installing the Wi-Fi Module (2230) to the M.2 E Key Slot (Optional)
B
如何安裝無線C / So installieren Sie die WiFi-Modul / Comment installer le module WiFi / Come installare il modulo WiFi / Cómo instalar el módulo WiFi/
WiFi
/ Como Instalar o Módulo WiFi / WiFi Module를 설치하는 방법 / WiFi モジュールの取り付け方法
1. Locate the WiFi Module slot on the
2. Carefully insert the WiFi Module into
motherboard.
the slot.
4G LTE / 5G Module: Installing the 4G LTE/5G Module (3042/3052)
C
to the M.2 B Key Slot (Optional)
如何安裝 4G LTE/5G模組 /
1. Locate the 4G LTE/5G module
2. Carefully insert the 4G LTE/5G
slot on the motherboard.
Module into the slot.
M.2 SSD: Installing the M.2 SSD Device (2280) to the M.2 M Key Slot
D
如何安裝 M.2 / SSD So installieren Sie die M.2-SSD / Comment installer le SSD M.2 / Come installare l'unità SSD M.2 / Cómo instalar el disco de estado sólido M.2 /
M.2 / Como Instalar o SSD M.2 / M.2 SSD를 설치하는 방법 / M.2 SSD の取り付け方法
1. Gently insert the M.2 module, along
2. Remove the membrane from heatsink.
the guiding tabs, into the heatsink
Align the heatsink to the edge of the
bracket and press down the heatsink
bracket.
into the bracket.
2.5-inch Hard Drive: Installing 2.5" Storage Device (Optional, iEP-5000G-000/010, iEP-5010G-010)
E
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
1. Remove the screws and then remove
2. Attach the 2.5" SSD to the HDD bracket
the front cover.
and secure it with four screws.
connect the SATA cable to the SSD.
Note:
e SSD Bracket is not provided.
Please purchase it seperately if needed.
4.
en reinstall the front cover.
3. Tighten the screw to secure the WiFi Module
to the motherboard.
Installing the 5G Module Heatsink
(Optional, iEP-5000G-000/010/003,
iEP-5010G-010/013)
如何安裝 5G散熱片 (選購)
3. Tighten the screw to secure
1. Remove the membranes on the both sides of
the 4G LTE/5G Module to
the 5G heatsink.
the motherboard.
2. Attach the 5G Heatsink to the internal side
of the front cover and secure it with screws.
3. Carefully insert the M.2 Module
4. Tighten the screw to secure the
with heatstink into the slot.
M.2 module and the heatsink to
the motherboard.
3. Attach the SSD assembly to the front cover
and secure it with four screws.
en
connect the SATA connector and Power Cable to
the motherboard.
Installing a Nano SIM Dard and Micro SD Card
如何安裝SIM卡及Micro SD卡/
1. Release the screws on the iEP-5000G/5010G Series
and remove the SIM/Micro SD Card slot cover.
Installing Wall Mounting Brackets (Optional)
如何安裝壁掛架 / So installieren Sie die Wandmontagehalterungen / Installation les supports de montage mural / Come installare
le sta e di montaggio a parete / Cómo instalar los soportes para instalación en pared /
/ Como instalar as braçadeiras de montagem na parede / 벽면 마운팅 브래킷을 설치하는 방법 / 壁取り付けブラ
ケットの設置方法
1. Attach the wall mounting brackets to the
iEP-5000G/5010G Series and secure it with screws.
Installing DIN Rail (Optional)
如何安裝 DIN 導軌安裝托架 (選購) / So installieren Sie die DIN-Schienenmontagehalterung
(optional) / Installation du support de montage sur rail DIN (en option) / Come installare la sta a
di montaggio su guida DIN (opzionale) / Cómo instalar el soporte para instalación en riel DIN
/
(opcional) /
Como instalar a braçadeira de montagem do trilho DIN (Opcional) / 딘 레일 마운팅 브래킷
을 설치하는 방법(선택 사항) / DINレール取り付けブラケット（別売）の設置方法
en
Attach the Din Rail Bracket to the iEP-5000G/5010G Series and secure it
with screws.
en you can place the iEP-5000G/5010G Series to the Din Rail.
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
SIM Card
Micro SD Card
2. With the gold contacts facing front,
carefully insert the SIM Card or the
SD Card into the designated slot until
it clicks.
2.
en you can attach the iEP-5000G/5010G
Series to the wall with screws.
Positions of the iEP-5000G/5010G Series
iEP-5000G/5010G Series系列擺放 / Positionen der iEP-5000G/5010G Series /
Positions de la série iEP-5000G/5010G Series / Posizioni della iEP-5000G/5010G Series
/ Posiciones de la iEP-5000G/5010G Series /
DIN (
) /
Posições de iEP-5000G/5010G Series / iEP-5000G/5010G Series 시리즈의 위치
/ iEP-5000G/5010G シリーズの位置
e iEP-5000G/5010G Series should be placed in vertical position only.
3. Place the cover back and secure it to the
iEP-5000G/5010G Series with screws.
Dimension of the iEP-5000G/5010G Series
with Wall Mounting Bracket Installed
100mm
86mm
53mm
42mm
iEP-5000G/5010G Series /
Vertical Position
Publicidad
