UHPPOTE HBK-A02 Manual Del Usuario página 8

0 #
8 1
1 #
0 #
1
1 #
9
0 #
2
1 #
2 #
Remark : All code can be 4 to 8 digits long except every as zero.
Set the code of an
added card
Reset to default
admin code
Reset to default
setting
System Setting
Set to Normal Mode.
The door will locked automatically after an unlock
operation.
Set keypad
output mode
Set to Toggle Mode.
The door will keep unlocking until next unlock
operation.
Optional Setting
ON (Default)
Set buzzer
OFF
ON (Default)
Set keypad
OFF
backlight
Auto Mode
The following operations must be done
out of programming mode
# # Read an Added Card
1. Disconnect the power.
2 Press .
00 #
after the HBK-A02 is powered on.
1. Disconnect the power.
2. Press
99 #
after the HBK-A02 is powered on.
PIN
within 5 seconds
within 5 seconds
7
# #
Repeat PIN
Resets the admin code to
123456.
Resets the device to the
factory default settings.
EN