SAFETY INSTRUCTIONS
•
Keep the digital hygrometer clean and in good condition.
•
Protect the device from static electricity, high temperatures, thermal shock
caused by rapid ambient temperature change, and anything that lets off an
electro-magnetic field.
•
Do not get the device wet or use it in damp/ wet locations or areas where
there is condensation.
•
Do not use the device in areas where there is steam, dust or smoke. These
conditions may result in erroneous readings.
•
DO NOT use the meter for any purpose other than that for which it is
designed.
HOW TO USE
Ensure the batteries are inserted properly into the battery compartment.
The hygrometer can be wall mounted or can be freestanding using the flip-out
stand on the back of the device.
Set the time
1. Press and hold the 'MODE' button for 2 seconds until you hear a beep sound
and the clock minutes start to flash.
2. Press the 'ADJ' button to adjust the minute digits.
3. Press the 'MODE' button again to adjust the hour digits in the same way.
Set the clock format
1. Press the 'MODE' button again you can set the clock to either a 12-hour
format or 24-hour format.
2. Press the 'ADJ' button to select which format you prefer.
13