Mastech Calle 76 Manual De Instrucciones página 2

Assembly Instructions for pannier racks
Note :
Do not �ghten the screws un�l they are completely aligned with the holes.
Before the installa�on, please verify through the manual that all pieces and parts are
complete.
Tools Required:
Hex Allen Wrench Set
Combination Wrench Set
Assembled Kit
Parts included:
Socket Screw
Pannier Racks
M8 x 30
1
Quan�ty: Quan�ty:
Flat Washer Safety Nut
M6 M8
5 7
Quan�ty: 6 Quan�ty: 2
After the installation of the parts, please check that they are aligned and that all the hardware is properly tightened
Calle 76 # 52D - 74 / Telefax: (57+4) 448 8428 / Medellín - Colombia
Socket Screw Flat Washer
M6 x 60 M8
1 2 4
4
Quan�ty: 6 Quan�ty: 2
Aluminum Spacer
5/8"- 6 - 30
* This picture could be some changes with
respect to nal product
8
Quan�ty: 6
www.mastechno.com
SUZUKI VSTROM 250 18-UP
Installa�on
1- Remove the fasteners in the following image, on
both sides of the motorcycle.
2- install the luggage rack supports as indicated in
the diagram
1
4
7
3- Install the rear tube using the screws
8
2
5
1
7
y