Publicidad
Idiomas disponibles
Idiomas disponibles
4. Initial use
Take the device out of the package and remove all the packaging material. Place
the camera at the desired location. You have the option of fixing the camera to
your monitor. Open the webcam clip (stand) and follow the method shown in the
figure to fix the webcam to the top of the monitor. Make sure that the clip (stand)
is firmly attached and that camera cannot fall down.
Optionally, a thread is provided at the bottom of the stand using which the cam-
era can be fixed to a tripod.
Connect the USB connection cable to a free USB port of your computer. The
device is automatically installed via Plug&Play and is then ready for use.
5. Safety instructions and disclaimer
Never try to open the device to repair or make modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The device is not waterproof,
hence please use it only in dry surroundings. Protect it from high humidity, water
and snow.
Keep the device away from high temperatures. Do not expose the device to sudden
changes in temperature or strong vibrations, as this could damage the electronic
7
English
Publicidad
