Thank you for buying our machine.
This manual contains information on the use and maintenance of the machine. This information
is based on the latest product information available at the time of approval for printing. We re-
serve the right to make changes without prior notice and without incurring any other obligation.
This manual should be considered as a permanent part of the machine, which must accom-
pany it if it is resold or borrowed.
1. SAFETY INFORMATION
Safety is as important to you as to others. We have detailed the most relevant safety informa-
tion in both the manual and the machine. Please read it carefully.
This safety information warns you that there is a potential danger to you as well as others.
The keywords are marked with a "!" Located in front of the information to be highlighted. These
words are "Danger, Warning, Attention" / "Danger, Warning, Attention."
DANGER / DANGER
If you do not follow the instructions in this manual, you may suffer serious injuries and even death.
WARNING / WARNING
Indicates the possibility of personal injury or damage to the equipment if you do not follow the instructions.
ATTENTION / ATTENTION
If you do not follow the instructions in this manual, you may damage the machine or be injured.
Damage prevention
You will see other important information marked "ATTENTION" .
ATTENTION: If you do not follow the instructions in this manual, you may damage the machine.
Prevention and safety
If you use the machine following the instructions in this manual, it will work safely and without
problems. Before using the machine, please read this manual carefully. Otherwise, you may
suffer an injury or damage the machine.
Circled or crossed symbols indicate that it is prohibited.
2. SAFETY RULES
Before using the wood chipper
•
Operators must be fully trained before using this machine.
•
Read and understand the user manual.
•
The machine must be placed on a level floor, all protections installed and in good condition.
•
Blades must be in good condition. All blades must be sharp or if damaged they must be repla-
ced with new ones.
•
Check that all fasteners are tight.
English
Owner´s manual
17