Publicidad
Idiomas disponibles
Idiomas disponibles
OBD 2 (EOBD) Electrical System Suspense Keeper
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This product supplies power to the vehicle during battery replacement so various settings such as
radio codes, seat memory etc. are keept and prevents data loss in the on-board electronics while the
battery is being changed. The connection is made via the OBD II socket (DLC) and alligator clips on
an external 12 volt vehicle battery. The device has a readiness display that checks and displays a
secure connection establishment.
SAFETY INFORMATIONS
•
Keep children and other persons out of the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Only connect the device to an external 12 volt vehicle battery.
•
Before starting the repair, remove the ignition key to prevent accidental attempts to start the
engine and any damage that might result.
•
Do not switch on any consumption when the device is in use.
•
If the fuse is defective, replace it with a new one of the same data.
•
These instructions serve as brief information and in no way replace a workshop manual.
Please always refer to the vehicle-specific service literature for information on removing and
installing the vehicle battery.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 63313
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
