Style selections SGY-GAR4 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
Assemble Decorative Metal Hose Cabinet
1. Attach the handle (A) to the hose reel
housing (B). Push down on the handle (A)
until it reaches the top of the locking pins (C).
2. Push in one pin and push down on the handle
until it just starts to cover the locking pin (C).
3. Repeat step 2 for the other side of the
handle (A).
4. Push down on the handle until both locking
pins (C) lock into the holes on the handle (A).
When assembling make sure the decorative side of the handle
WARNING
assembly is facing the hose reel.
5. Use Phillips screwdriver to install
crank handle (D) with screw (E).
1
A
C
B
2
5
C
D
E