JVC AL-F50B Manual De Instrucciones página 30

OPERATION
Preparing to Play
1. Remove the rubber belt from the whole cartridge.
Gently pull this
belt out of the
whole cartridge.
2. Remove the protector from the stylus.
3. Unlock the tone arm from the arm clip if it is locked.
Arm clip
Tone arm locked
4. Press down
Button lowered: Power on
5. Place a vinyl record on the platter, lining up its center hole with the center spindle.
 For 45 RPM records, place the supplied 45 RPM adapter on the center spindle before placing the record on the platter.
6. Press the 33/45 button to set the platter rotation speed.
Button raised: 33 RPM
This rubber belt is used for securing the whole

cartridge to prevent it from being damaged
which might be resulted from vibration during
transportation.
Tone arm unlocked
and the LED will illuminate red.
Button raised: Power off
Button lowered: 45 PRM
 The stylus may become worn out, damage or
dirty depending on your use case. In such
condition, replace the whole cartridge. For
replacement cartridge, you may purchase
Audio Technica AT 3600 L Cartridge online.
EN-4