Pusat CLUTCH GAMEPAD Manual De Usuario página 3

How to setup your controller for Android
Press the gamepad's B and Home button around 5 seconds to start the controller till the motor vibrates. The RGB
LED of home button is flash quickly when search the device.
• Turn on the Bluetooth connection your device
• Search and pair controller then choice the device name [PUSAT Clutch Gamepad] to connect
• The RGB LED of home button is green color after connect successful.
How to setup your controller for NSW
Turn on the console, enter the system settings:
• Go to [Airplane Mode] and select to turn it on.
• Scroll down and select [Controller Connection (Bluetooth)] to turn on Bluetooth connectivity while in Airplane
Mode.
• Go to the [Controllers] and select the [ Change Grip / Order]
• Press the gamepad's Home button till the motor vibrates, to enter the pair mode start to pairing. The RGB LED
is flashes quickly when search the device.
• To choice the device of Gamepad and the RGB LED of home button is keep to lighting for successful connecting.
How to setup your controller for X-Input
Press the gamepad's Y and Home button around 5 seconds to start the controller till the motor vibrates.
The RGB LED is flash quickly when search the device.
• Turn on the Bluetooth connection your device.
• Search and pair controller then choice the device name [Xbox Wireless Controller] to connect.
• The RGB LED of home button is blue color after connect successful.
How to set your controller for X-Input and Android with receiver
Connect the receiver with your computer then long press the Home button to start the connection.
The RGB LED of home button is blue color after connecting. You can push both the start (+) and back (-) buttons to
switch for Android mode. The RGB LED of home buttonis red color. Remark : This controller has internal memory
chip in 2.4GHz mode, it will remember the previous mode setting. You can press and hold the start (+) and back (-)
buttons to switch mode.
EN
03