Publicidad
Idiomas disponibles
Idiomas disponibles
Important!
Please read these introductions before using the stand. Keep for future reference and do not destroy.
Technical data
Maximum load: 30 kg
For bicycle frames from 25mm to 45mm
Intended use
This bicycle working stand was created for private use only.
Safety tips
Risk of injury!
•
Please carefully read the installation instructions and user manual before installation and follow
the order of steps as provided in the instructions.
Warning! Do not exceed the maximum load of 30 kg! Exceeding the maximum load risks injury
•
and damage to the item.
•
Check all parts of the stand. Loose screws must be tightened and any defective parts must be
replaced to avoid damage to the item.
•
Please ensure that the socket head screws connecting the upper bar are always tight.
Warning! Please put the bicycle work stand only on a solid and stable surface to avoid tipping.
•
Warning! Nobody should try to ride the bicycle when it is mounted on the stand!
•
Avoid damage! To avoid damage to the bicycle, please do not squeeze conduit or cable
•
with the retaining clamp.
•
When using the stand for carbon or thin aluminum frames, be careful not to over tighten and
damage the bicycle frame. The clamp screw fixings are powerful.
CAUTION!
Improper use or use for other applications may endanger the health of the person or cause damage.
Content Delivery
1X Allen key
1X foot assembly (A)
1X telescopic bar (B)
1X bike support stand (C)
1X tool shelf (D1/D2)
1X front wheel stabilizer (E1/E2/E3)
2X socket head screws (F)
EN
01
Version:
2022-05-23
Publicidad
