DEFAULT SETTINGS
Once the laser projector is plugged in, it will enter the default mode where all effects are
on. Use the button on the cord to change the effect settings. This light has a built-in timer
that is designed to automatically shut off after 6 hours of operation. Use the BlissHome
app to control brightness, control cloud color, rotation speed, and set advanced timers.
INSTALLATION TIPS
•
Do not connect the light to a dimmer pack, as a dimmer accessory may damage
the laser component.
•
The darker the display area, the brighter your projection will appear.
PRODUCT SPECIFICATIONS
Laser Classification
Laser Color/Wavelength
Power/Energy Output
Nebula Cloud Color
Housing
Power consumption
USB Power Adapter Input
USB Power Adapter Output
Operation
Operating Temperature
Projection Coverage
Maintenance
Dimensions
Cord Length
Designed in the USA
By BlissLights LLC
2625 Temple Heights Dr, Ste A
Oceanside, CA 92056
Made in China
Class 2
Green - 503nm, Blue - 450.2nm
Green - 0.545mW, Blue - 0.843mW
RCBW
ABS+PC plastic
Less than 10 W
100-240 V ~ 50/60 Hz, 0.35 A
5V --- 2A
Indoor
14°F to 95°F (-10°C to 45°C)
Laser - 30 x 30 ft Nebula cloud - 15 x 15ft
Maintenance Free
Projector (5.25" Sphere) + Base (Diameter 4" x 1")
5 ft (1.5 m)
5