JBM 53645 Manual De Instrucciones página 5

REF. 53645
POWER SOURCE
POWER SOURCE
Power cord
Voltage
Max. Discharge
1
Inser the Pump into the drum
through the drum hole.
4
Place the Nozzle into the re-
ceiving container to transfer
9
After dispensing Switch off the toggle switch (Down) and lift
the Nozzle upward allowing all the liquid in the line to flow
DC POWER
4m long with
Crocodile Clips
12v DC
18.4 LPM (4.86
GPM)
2
Screw the bung adaptor with
5
Switch on the Toggle switch
(UP) and pull the Nozzle
the liquid.
7
Switch off when finished
transfer fluid.
back into the drum.
AC POWER RECHARGEABLE
(Ni-Cd)
AC to DC power Rechargable 1.5
adapter Ah Ni Cd battery
with 1 hour Quick
Charger
100-240V AC, 19.2V Battery &
50/60 Hz. AC charger (110V
or 220V)
18.9 LPM (5GPM) 28 LPM (7.4 GPM)
the drum hole.
trigger.
8
Take off the nozzle from
drum.
10
holster to prevent any damage to the
· 5 ·
RECHARGEABLE
(Li-Ion)
Rechargable 1.3
Ah Li Ion Battery
with 1 hour Quick
Charger
18.5V Battery &
AC charger
(110V o 220V)
28 LPM (7.4GPM)
3
Place the Nozzle inside the
Nozzle Holster provided on
the side of the pump.
6
Turn on the trigger.
Place the Nozzle back into the
hose or to the Nozzle.