Miracle-Ear LINK Remote AV Manual Del Usuario página 4

Basic Use
Ear Selection Switch
Left
The Ear Selection Switch controls whether
adjustments are made to one hearing aid or both
hearing aids.
Set of Hearing Aids: To adjust both hearing aids at
the same time, position the switch in the center.
Single Hearing Aid: The switch is ignored, as the
Miracle-EarLINK ™ Remote AV always sends the
appropriate left-side or right-side command.
LED
The blue LED blinks when a button press command
is sent to the left hearing aid. Similarly, the red LED
blinks for the right hearing aid.
6
Both Right
Volume Up/Down
Short Press: The overall level of all sounds coming
through your hearing aid microphone changes in
the selected direction (either up or down).
Long Press: If streaming audio from a 2.4 GHz
accessory, the audio stream volume changes in the
selected direction (either up or down).
Home
To reset your hearing aids to memory one and the
default volume level, press the Home button.
Lock/Unlock
Locked
To make adjustments to your hearing aids, the
Miracle-EarLINK ™ Remote AV should be in the
Unlock state. When not using your Miracle-EarLINK
Remote AV, you can lock it to prevent inadvertent
hearing aid changes and to extend its battery life.
Basic Use
Unlocked
™
7